0445110248 5043801170 Common Rail Injector 0445 110248 Diesel Fuel Injector 0445 110 248 for for Lveco Daily3.0

<Product Description> This high-pressure electronically controlled common rail fuel injection valve body assembly (part identification code: 0445110248 / 0 445 110 248; common OE cross-reference and interchangeable identification codes include 0986435154, WE0113H50, WE0113H50A, WE01-13-H50, etc., mainly matched with the Duratorq TDCi 2.5L / 3.0L inline four-cylinder diesel power platform, widely installed in Ranger off-road pickup trucks, BT-50 light pickup trucks, and commercial multi-purpose vans, etc.) is meticulously crafted. As the core actuator in the fuel supply system that controls the atomization quality of high-pressure diesel fuel and the timing of electronically controlled pulse injection, it bears the heavy responsibility of accurately metering and rapidly dispersing high-pressure diesel fuel into ultra-fine particles under millisecond-level electrical signal commands, promoting full mixing and combustion of fuel and intake airflow.

The product is designed to meet the manufacturing standards of "millisecond-fast response and micro-fine atomization." Internal needle valve components and control valve cores are made from carefully selected aerospace-grade hardened special alloy steel, combined with ultra-high precision geometric grinding and low-friction polishing. The surface is covered with a high-density, ultra-wear-resistant hardened coating, effectively preventing early erosion and pressure relief jamming caused by diesel impurities. After the parts are installed, drivers and maintenance technicians will experience a very clear and intuitive improvement: cold starts in the morning are crisp and quick, and the severe vibration at low idling speeds is reduced to a smooth level; when facing off-road climbing, fully loaded towing, or long-distance highway cruising, the accelerator pedal response is firm and responsive, acceleration is smooth and powerful, and exhaust smoke is significantly improved, resulting in satisfactory fuel efficiency control and a smooth driving experience.

<Product Description>

<Product Advantages> In-house manufacturing in a physical factory with standardized quality control. To address the issues of accumulated tolerances exceeding standards in parts assembly, uneven fuel supply to cylinders, and high-pressure leakage risks caused by multi-level distribution chains, this system effectively reduces intermediate procurement costs. Utilizing a standardized production base, it implements precise end-to-end control, eliminating intermediate markups and ensuring high consistency in fuel injection quantity and pressure across all cylinders. This reduces maintenance budgets while providing robust and reliable power for vehicle operation.

Strict quality control using a full-condition ultra-high-pressure digital dynamic test bench. Addressing the issues of response delays, pressure relief jamming leading to engine misfires and vibrations, and wasted time and money due to repeated disassembly and adjustment caused by low-quality parts, each injection component undergoes automated testing before leaving the factory. Under simulated high-temperature and ultra-high-pressure conditions, the flow rate and sealing performance across different pressure ranges are precisely calibrated, ensuring immediate usability upon installation and significantly saving time and costs associated with equipment disassembly and adjustment.

Large-scale warehousing ensures readily available stock and rapid delivery response. For daily commuting and commercial transport vehicles, which are high-attendance productivity tools, the costly delays, defaults, and lost work losses caused by fuel system failures are a significant concern. Our warehousing center maintains ample stock of best-selling specifications year-round. Once an order is confirmed, we respond quickly and prioritize packing and shipping within 24-48 hours, significantly shortening the logistics and delivery cycle. This helps fleets and owners quickly restore equipment availability and effectively avoids losses due to downtime.

Special hardened alloy needle valves with wear-resistant coating protection. Addressing the issue of premature wear and valve core seizure caused by differences in diesel lubricity and sulfur content in different regions, the core valve assembly uses high-strength special bearing steel and a surface anti-corrosion hardening treatment, greatly improving fatigue resistance and wear resistance. It maintains stable performance even under harsh environments and prolonged high-load operation, avoiding the additional costs of frequent disassembly and repair.

</Product Advantages>

<Parameter Table>

| Parameter Name | Parameter Value |

| --- | --- |

| Product Name | Pickup Truck and Commercial Diesel Engine Electronic High-Pressure Common Rail Injector |

| Standard OE Part Number | 0445110248 |

| Interchangeable Part Number | 0 445 110 248 / 0986435154 / WE0113H50 / WE0113H50A / WE01-13-H50 |

| Applicable Engine Platform | Duratorq TDCi 2.5L / 3.0L Diesel Engine |

| Fuel Supply System | High-Pressure Electronic Common Rail Injection System |

| Core Needle Valve Material | Aerospace-grade quenched bearing steel, corrosion-resistant high-hardness special alloy |

| Surface Treatment Process | High-density ultra-wear-resistant hardened coating |

| Nozzle Machining Technology | EDM High-precision EDM micro-hole machining |

| Maximum working pressure | ≥ 1600 bar |

| Working temperature range | -40°C to +125°C |

| Internal sealing components | Original factory grade high-temperature resistant and swelling-resistant special fluororubber (FKM O-Rings) |

| Net weight per unit | Approx. 0.68 kg / piece |

| Factory testing standards | 100% automated bench full-condition flow and sealing tests |

| </Parameter table> | |

<Application scenarios> Pickup truck off-road outdoor adventure and complex road conditions: Diesel pickup trucks are highly dependent on the response speed of the fuel supply system and the low-speed, high-torque output when driving on unpaved roads, muddy mountain roads, and steep slopes. When the owner notices that the vehicle is struggling to climb hills, has a sluggish throttle response, or emits black smoke from the exhaust, maintenance personnel should promptly replace the high-precision common rail injector. After the upgrade, fuel injection establishes quickly and stably, providing ample and smooth low-end torque, helping vehicles confidently handle harsh off-road conditions.

Intercity Express Delivery and Short-Distance Heavy-Duty Freight Scenarios: Small logistics vans and commercial pickup trucks frequently deliver goods between cities, often operating under conditions of heavy loads, frequent stop-and-go traffic, and high-speed cruising. When vehicles experience difficulties climbing hills under high loads, abnormally increased fuel consumption, or severe engine idling vibrations, the repair team replaces the entire set with high-specification fuel injection valves. Precise atomization and flow control allow the engine to regain abundant power, significantly improving fuel efficiency per 100 kilometers and ensuring timely delivery.

**Application Scenarios**

Q: Can I use the product directly after installation? Is a correction code required?

A: Each injector has a unique flow correction code (IMA/QR code) generated during factory testing. It is recommended to use a diagnostic tool to flash the correction code into the engine control unit (ECU) after installation to achieve optimal fuel efficiency and smoothness.

Q: What are the inventory and delivery times for bulk purchases? A: We have our own factory and large warehouse, maintaining a large inventory of this model year-round. Standard orders can be packaged and shipped within 24-48 hours, and large-volume orders can be quickly scheduled for production.

Q: How do you guarantee the quality and performance of your products before they leave the factory?

A: All injectors undergo assembly in a Class 100 cleanroom and 100% full-condition bench testing, covering key indicators such as sealing, pre-injection volume, full-load injection volume, and return oil volume. These stringent testing standards ensure that they are of superior quality from the outset.

Q: What is the warranty period? What about after-sales service?

A: We offer a 12-month warranty period. If performance failure occurs within the warranty period due to non-human factors, we provide rapid replacement or after-sales technical support to ensure your peace of mind when using our products.